SCANDIFORM – rectangular

Flexible embedding mould

SCAN-DIA offers a comprehensive range of silicon rubber embedding moulds. SCANDIFORMS are highly flexible and absolutely dimensionally stable. Cured samples can be easily released without residual contamination. There is no need to grease the mould. After each use, the SCANDIFORM can immediately be reused over and over again.

Please note: When using different SCAN-DIA casting resins, the embedding moulds should be assigned. Differing durabilities should be considered. With polyester resin such as SCANDIPLAST, the mould life is several thousand embeddings. With acrylic resin such as SCANDIQUICK, it is approx. 100 embeddings, and with epoxy resin, such as SCANDIPLEX, it is approx. 25-30 embeddings.

Inside 17 x 25 x 20 mm in height5 piecesItem no. 91243
Inside 25 x 55 x 20 mm in height5 piecesItem no. 09124
Inside 40 x 30 x 20 mm in height5 piecesItem no. 91244
Inside 55 x 30 x 22 mm in height1 pieceItem no. 91245
Inside 70 x 40 x 22 mm in height1 pieceItem no. 91246
Inside 75 x 50 x 25 mm in height1 pieceItem no. 91242
Inside 100 x 50 x 22 mm in height1 pieceItem no. 91247
Inside 125 x 27 x 20 mm in height1 pieceItem no. 91241
Inside 140 x 60 x 30 mm in height1 pieceItem no. 91248
Productphoto scandiform rectangular 1
Productphoto scandiform rectangular 2

Do you have any questions regarding our SCANDIFORM – rectangular?

Please call us, our experts will be happy to advise you!

+49 (0)2331 / 624 69-0